Unsure which stroller you have?

The new dot was launched in mid 2019. It has aerotech wheels and a footbrake. The dot comes in black and multicoloured liners are available for it.

The dash has a hand actuated brake and aeromaxx wheels. It was available in black, grey marl, blue marl and red. 

The sport 2015 - 2019 / phil&teds nav was launched in 2012

There has been two versions of the

phil&teds nav; the v1 has a foot pedal brake and the v2 has auto stop brake on the handle. 

The sport model between 2015 and 2019  has an auto stop brake on the handle. 

If you are unsure if you have the phil&teds nav v1 or its predecessor explorer look out for the way the stroller unfolds. The sport 2015 / phil&teds nav has a latch that keeps the stroller folded, explorer has a red button that needs to be pushed in to unfold it. 

(formerly called navigator)

The dot was launched in 2012. This ultra compact stroller comes with 10" wheels. 

There has been three versions, v1, v2 and v3. To tell the difference, the webbing straps of the v1 harness go through the back of the seat and attach to the rear of the frame - with v2 they do not. The v3 has aerotech wheels where as the v1 and v2 had air filled wheels. 

A brand new version dot was launched in 2019.

The smart lux is a compact stroller with four wheels (air filled in rear, smaller puncture proof EVA wheels at the front). It has aluminium frame and it comes in three colours: ruby, cobalt and taupe. The stroller takes one seat only.

To tell the difference between the smart v1 and the smart lux see here.

The smart is a compact lightweight stroller that was released in 2010. The smart seat is made of aerocore rubber and it has four puncture proof EVA wheels.

There has been two versions, v1 and v2 and the easiest way to tell the difference is the frame, the colour of the v1 frame is silver whereas the v2 is black. 

To tell the difference between the smart and the smart lux see here.

The promenade was released in 2012 and it is our premium urban inline stroller. It has four puncture proof wheels and can take two modular seats and these can be used either rear or forward facing. 

The verve has been manufactured since 2011. It has aluminium frame, brake on the handle bar and four wheels. 

There has been three versions of the verve, to identify which version you have see here.

The vibe has been manufactured since 2008. It has three wheels, aluminium frame and brake on the handle bar. 

There has been three versions of the vibe, to identify which version you have see here. 

The explorer was manufactured between 2010 and 2012. It has a one hand compact fold, a separate liner and foot pedal brake. It also has a follow-the-sun sunhood and a plastic footwell. 

To tell the difference between the explorer and its successor, phil&teds navigator v1, see how the unfolding mechanism works. The explorer has a red button that needs to be pushed in to unfold, the sport 2015 / phil&teds navigator has a frame latch.

The classic v1 was manufactured between 2008 and 2010. It was available in red only. It has a fixed handle which can be turned around allowing a second position for it. 

The classic v2 was launched in 2010. It has a one hand compact fold and a wire foot brake. It has a fixed handle which can be turned around allowing a second position for it. The classic v2 is available in black only.

The hammerhead was manufactured between 2010 and 2011. 

The hammerhead has a foot pedal brake and four wheels (two smaller ones at the front). 

The sport buggies were manufactured between 2007 and 2010. There is a tag on the sunhood that says 'sport'.

The sport has a wire foot brake and it folds with two levers on each side 

Two versions, v1 and v2 were manufactured. A quick way to tell the difference is the frame lock - this was introduced with the v2 (it clicks and stays in the folded position) whereas the v1 stays in the folded position with a frame strap.  

The e3 strollers were manufactured between 2003 and 2007. There were two different versions, v1 and v2.

The easiest way to tell if it is an e3 v1 or v2 is by the double kit attachment on the back of the stroller. If there are two short pegs or posts it is a v2. If there are two female connectors (hollow steel tubes) it is a v1. 

On e3 v2 strollers, 'e3' is embroidered on the seat. 

On e3 v1 stroller, the word 'explorer' is sewn on the stroller's seat.